HP SnA 1일차 오후-2(mp,shutdown 포함)

 *************************************************************************
  This is a private system.
  Do not attempt to login unless you are an authorized user. 
  Any authorized or unauthorized access or use may be monitored and can
  result in criminal or civil prosecution under applicable law.
 *************************************************************************

MP login: Admin
MP password: *******

       Hewlett-Packard Integrated Lights-Out HP Integrity and HP 9000

    (c) Copyright Hewlett-Packard Company 1999-2006.  All Rights Reserved.

                           MP Host Name: mp233

                              Revision E.03.30

 *************************************************************************
                           Your Certificate is expired.
               Use the SO command to generate a new certificate.
 *************************************************************************

   MP MAIN MENU:

         CO: Console
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Log
         SL: Show Event Logs
         HE: Main Help Menu
          X: Exit Connection

[mp233] MP> co

 

        (Use Ctrl-B to return to MP main menu.)

 

- - - - - - - - - - Prior Console Output - - - - - - - - - -
                                                                                             
Value of TERM has been set to "vt100".
WARNING:  YOU ARE SUPERUSER !!

root@rx233   [/root]
# 

root@rx233   [/root]
#
- - - - - - - - - - - - Live Console - - - - - - - - - - - -

[Read only - use Ctrl-Ecf for console write access.]

[Read only - use Ctrl-Ecf for console write access.]
ls -al
total 96
drwx------   3 root       sys           8192 Jun 18 09:58 .
drwxr-xr-x  14 root       root          8192 Jun 15 18:57 ..
-rw-------   1 root       sys           1113 Jun 15 18:57 .profile
-rw-------   1 root       root            24 Jun 15 18:57 .rhosts
-rw-------   1 root       sys            712 Jun 18 14:53 .sh_history
-rw-------   1 root       sys            100 Jun 15 18:57 .shrc
drwx------   6 root       sys             96 Jun 15 18:05 .sw

root@rx233   [/root]
#
[Read only - use Ctrl-Ecf for console write access.]

[Read only - use Ctrl-Ecf for console write access.]

[Read only - use Ctrl-Ecf for console write access.]

[bumped user -  Admin]

root@rx233   [/root]
# ls -al
total 96
drwx------   3 root       sys           8192 Jun 18 09:58 .
drwxr-xr-x  14 root       root          8192 Jun 15 18:57 ..
-rw-------   1 root       sys           1113 Jun 15 18:57 .profile
-rw-------   1 root       root            24 Jun 15 18:57 .rhosts
-rw-------   1 root       sys            720 Jun 18 14:54 .sh_history
-rw-------   1 root       sys            100 Jun 15 18:57 .shrc
drwx------   6 root       sys             96 Jun 15 18:05 .sw

root@rx233   [/root]
# 
[returned to read only mode by user -  Admin]

root@rx233   [/root]
#        
[Read only - use Ctrl-Ecf for console write access.]
exit
logout root

HP-UX rx233 B.11.31 ia64 hp server rx1620
Console Login: rootn
Password:
Login incorrect
login: root
Password:
Last successful login:       Mon Jun 18 14:51:00 KST 2012 /dev/console 
Last authentication failure: Mon Jun 18 14:57:47 KST 2012 /dev/console 
1 authentication failures since the last successful authentication
Please wait...checking for disk quotas
(c)Copyright 1983-2006 Hewlett-Packard Development Company, L.P.
(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
(c)Copyright 1980, 1984, 1986 Novell, Inc.
(c)Copyright 1986-2000 Sun Microsystems, Inc.
(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
(c)Copyright 1989-1993  The Open Software Foundation, Inc.
(c)Copyright 1990 Motorola, Inc.
(c)Copyright 1990, 1991, 1992 Cornell University
(c)Copyright 1989-1991 The University of Maryland
(c)Copyright 1988 Carnegie Mellon University
(c)Copyright 1991-2006 Mentat Inc.
(c)Copyright 1996 Morning Star Technologies, Inc.
(c)Copyright 1996 Progressive Systems, Inc.

Confidential computer software. Valid license from HP required for
possession, use or copying.  Consistent with FAR 12.211 and 12.212,
Commercial Computer Software, Computer Software Documentation, and
Technical Data for Commercial Items are licensed to the U.S. Government
under vendor's standard commercial license.

You have mail.
                                                                                                                                               
Value of TERM has been set to "vt100".
WARNING:  YOU ARE SUPERUSER !!

root@rx233   [/root]
#

root@rx233   [/root]
# exit
logout root

HP-UX rx233 B.11.31 ia64 hp server rx1620
Console Login: root

   MP MAIN MENU:

         CO: Console
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Log
         SL: Show Event Logs
         HE: Main Help Menu
          X: Exit Connection

[mp233] MP> cm

 

        (Use Ctrl-B to return to MP main menu.)

 

[mp233] MP:CM> he

HE

==== MP Help: Main Menu =======================================================

 

Hardware Revision a5  Firmware Revision E.03.30 Oct 27 2006,13:43:15

Integrated Lights-Out for HP Integrity and HP 9000 - Management Processor (MP)

                        MP Help System

    Use Ctrl-B to exit MP command interface and return to the main MP menu.

    Enter a command at the help prompt:
           OVerview  : Launch the help overview
           LIst      : Show the list of MP Command Menu commands
           <COMMAND> : Enter the command name for help on individual command
           TOPics    : Show all MP Help topics and commands
           HElp      : Display this screen
           Q         : Quit help

====
MP:HE> li
li
==== MP Help: Command Menu List =============================================

BP  : Reset BMC Passwords               MS  : Modem Status                    
CA  : Configure asynch/serial ports     PC  : Remote Power Control            
DATE: Display Date                      PG  : PaGing parameters setup         
DC  : Default Configuration             PR  : Power Restore Policy Config.    
DF  : Display FRU Information           PS  : Power management module Status  
DI  : DIsconnect users                  RB  : Reset BMC                       
DNS : Configure DHCP and DNS            RS  : Reset System through RST signal 
FW  : Upgrade MP firmware               SA  : Set MP Access                   
HE  : Display Help                      SNMP: Configure SNMP parameters       
ID  : System Information                SO  : Security Options                
IT  : Modify MP inactivity timeouts     SS  : System processors Status        
LC  : Configure LAN, SSH and Web ports  SYSREV: Display System firmware Revs. 
LDAP: Configure Directory parameters    TC  : Reset system via INIT           
LM  : License Management                TE  : TEll- send a msg. to other users
LOC : Locator LED display               UC  : User Configuration              
LS  : LAN Status                        WHO : Display connected MP users      
MR  : Modem Reset                       XD  : Diagnostics and reset of MP     

====
(HE for main help, enter command name, or Q to quit)
MP:HE> q
q

[mp233] MP:CM> uc

UC

This command allows you to modify the user configuration.

User Configuration Menu:
     L - List current users
     N - Add a New user
     C - Change a current user
     D - Delete a current user

Enter menu item or [Q] to Quit: l
l

Current User Configuration:
       Login ID             User Name               Access Rights   Enabled
  --------------------------------------------------------------------------
   1 - Admin                Default Admin           C, P, M, U      Yes

Enter number for more detail, or [Q] to Quit: n
n

** Invalid user number specified **

Current User Configuration:
       Login ID             User Name               Access Rights   Enabled
  --------------------------------------------------------------------------
   1 - Admin                Default Admin           C, P, M, U      Yes

Enter number for more detail, or [Q] to Quit: q
q

User Configuration Menu:
     L - List current users
     N - Add a New user
     C - Change a current user
     D - Delete a current user

Enter menu item or [Q] to Quit: n
n

Current User Parameters:
     L - User Login ID         :
     P - User Password         :
     U - User Name             :
     W - User Workgroup        :
     R - User Access Rights    : Console access
     M - User Operating Mode   : Multiple
     E - User Enabled/Disabled : Enabled
     D - Modem Dial-back       : Disabled
     T - Modem Dial-back Phone :

Enter parameter(s) to change, A to modify All, or [Q] to Quit: l
l

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     Q to Quit

User Login ID:

Enter new value, or Q to Quit: kio
kio

   -> User Login ID will be updated

 

New User Parameters (* modified values):
   * L - User Login ID         : kio
     P - User Password         :
     U - User Name             :
     W - User Workgroup        :
     R - User Access Rights    : Console access
     M - User Operating Mode   : Multiple
     E - User Enabled/Disabled : Enabled
     D - Modem Dial-back       : Disabled
     T - Modem Dial-back Phone :

Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: p
p

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     Q to Quit

User Password:
   6-24 characters

Enter New Password:

** You must specify a password of 6 or more characters **

User Password:
   6-24 characters

Enter New Password:

Enter New Password for confirmation:

   -> Password will be updated

 

New User Parameters (* modified values):
   * L - User Login ID         : kio
   * P - User Password         : ************
     U - User Name             :
     W - User Workgroup        :
     R - User Access Rights    : Console access
     M - User Operating Mode   : Multiple
     E - User Enabled/Disabled : Enabled
     D - Modem Dial-back       : Disabled
     T - Modem Dial-back Phone :

Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: u
u

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     Q to Quit

User Name:

Enter new value, or Q to Quit: Kio Eom
Kio Eom

   -> User Name will be updated

 

New User Parameters (* modified values):
   * L - User Login ID         : kio
   * P - User Password         : ************
   * U - User Name             : Kio Eom
     W - User Workgroup        :
     R - User Access Rights    : Console access
     M - User Operating Mode   : Multiple
     E - User Enabled/Disabled : Enabled
     D - Modem Dial-back       : Disabled
     T - Modem Dial-back Phone :

Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: w
w

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     Q to Quit

User Workgroup:

Enter new value, or Q to Quit: q
q

User Configuration Menu:
     L - List current users
     N - Add a New user
     C - Change a current user
     D - Delete a current user

Enter menu item or [Q] to Quit: l
l

Current User Configuration:
       Login ID             User Name               Access Rights   Enabled
  --------------------------------------------------------------------------
   1 - Admin                Default Admin           C, P, M, U      Yes

Enter number for more detail, or [Q] to Quit: q
q

User Configuration Menu:
     L - List current users
     N - Add a New user
     C - Change a current user
     D - Delete a current user

Enter menu item or [Q] to Quit: d
d

Current User Configuration:
       Login ID             User Name               Access Rights   Enabled
  --------------------------------------------------------------------------
   - - Admin                Default Admin           C, P, M, U      Yes

Select User to delete by number, or [Q] to Quit: n
n

** Invalid user number specified **

Current User Configuration:
       Login ID             User Name               Access Rights   Enabled
  --------------------------------------------------------------------------
   - - Admin                Default Admin           C, P, M, U      Yes

Select User to delete by number, or [Q] to Quit: q
q

User Configuration Menu:
     L - List current users
     N - Add a New user
     C - Change a current user
     D - Delete a current user

Enter menu item or [Q] to Quit: n
n

Current User Parameters:
     L - User Login ID         :
     P - User Password         :
     U - User Name             :
     W - User Workgroup        :
     R - User Access Rights    : Console access
     M - User Operating Mode   : Multiple
     E - User Enabled/Disabled : Enabled
     D - Modem Dial-back       : Disabled
     T - Modem Dial-back Phone :

Enter parameter(s) to change, A to modify All, or [Q] to Quit: l
l

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     Q to Quit

User Login ID:

Enter new value, or Q to Quit: kio
kio

   -> User Login ID will be updated

 

New User Parameters (* modified values):
   * L - User Login ID         : kio
     P - User Password         :
     U - User Name             :
     W - User Workgroup        :
     R - User Access Rights    : Console access
     M - User Operating Mode   : Multiple
     E - User Enabled/Disabled : Enabled
     D - Modem Dial-back       : Disabled
     T - Modem Dial-back Phone :

Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: p
p

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     Q to Quit

User Password:
   6-24 characters

Enter New Password:

Enter New Password for confirmation:

   -> Password will be updated

 

New User Parameters (* modified values):
   * L - User Login ID         : kio
   * P - User Password         : ************
     U - User Name             :
     W - User Workgroup        :
     R - User Access Rights    : Console access
     M - User Operating Mode   : Multiple
     E - User Enabled/Disabled : Enabled
     D - Modem Dial-back       : Disabled
     T - Modem Dial-back Phone :

Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: u
u

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     Q to Quit

User Name:

Enter new value, or Q to Quit: kioeom
kioeom

   -> User Name will be updated

 

New User Parameters (* modified values):
   * L - User Login ID         : kio
   * P - User Password         : ************
   * U - User Name             : kioeom
     W - User Workgroup        :
     R - User Access Rights    : Console access
     M - User Operating Mode   : Multiple
     E - User Enabled/Disabled : Enabled
     D - Modem Dial-back       : Disabled
     T - Modem Dial-back Phone :

Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: w
w

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     Q to Quit

User Workgroup:

Enter new value, or Q to Quit: kio
kio

   -> User Workgroup will be updated

 

New User Parameters (* modified values):
   * L - User Login ID         : kio
   * P - User Password         : ************
   * U - User Name             : kioeom
   * W - User Workgroup        : kio
     R - User Access Rights    : Console access
     M - User Operating Mode   : Multiple
     E - User Enabled/Disabled : Enabled
     D - Modem Dial-back       : Disabled
     T - Modem Dial-back Phone :

Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: r
r

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     Q to Quit

User Access Rights:
   Current -> C
              Options: C - Console access (default)
                       M - MP configuration
                       P - Power control
                       U - User administration
                       A - All rights
                       N - No rights

             (You can enter multiple rights separated by commas or spaces.
              e.g. C,P,U)

Enter new value(s), or Q to Quit: m p u a 
m p u a

** Mutually exclusive values specified **

** Invalid input. **

User Access Rights:
   Current -> C
              Options: C - Console access (default)
                       M - MP configuration
                       P - Power control
                       U - User administration
                       A - All rights
                       N - No rights

             (You can enter multiple rights separated by commas or spaces.
              e.g. C,P,U)

Enter new value(s), or Q to Quit: a
a

   -> User Access Rights will be updated

 

New User Parameters (* modified values):
   * L - User Login ID         : kio
   * P - User Password         : ************
   * U - User Name             : kioeom
   * W - User Workgroup        : kio
   * R - User Access Rights    : Console access, Power control,
                                 MP configuration, User administration
     M - User Operating Mode   : Multiple
     E - User Enabled/Disabled : Enabled
     D - Modem Dial-back       : Disabled
     T - Modem Dial-back Phone :

Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: y
y

   -> User Configuration has been updated.

User Configuration Menu:
     L - List current users
     N - Add a New user
     C - Change a current user
     D - Delete a current user

Enter menu item or [Q] to Quit: l
l

Current User Configuration:
       Login ID             User Name               Access Rights   Enabled
  --------------------------------------------------------------------------
   1 - Admin                Default Admin           C, P, M, U      Yes
   2 - kio                  kioeom                  C, P, M, U      Yes

Enter number for more detail, or [Q] to Quit: 

** Command Interface Timeout. **

[mp233] MP:CM> uc

UC

This command allows you to modify the user configuration.

User Configuration Menu:
     L - List current users
     N - Add a New user
     C - Change a current user
     D - Delete a current user

Enter menu item or [Q] to Quit: l
l

Current User Configuration:
       Login ID             User Name               Access Rights   Enabled
  --------------------------------------------------------------------------
   1 - Admin                Default Admin           C, P, M, U      Yes
   2 - kio                  kioeom                  C, P, M, U      Yes

Enter number for more detail, or [Q] to Quit: q
q

User Configuration Menu:
     L - List current users
     N - Add a New user
     C - Change a current user
     D - Delete a current user

Enter menu item or [Q] to Quit: q
q

[mp233] MP:CM> who

WHO

User Login        LDAP/Local   Rights         Port Name    IP Address    Mode

Admin              Local      C, P, M, U      TELNET     59.29.224.128    CM  

 

[mp233] MP:CM> di

DI

Current user access state:
     R - Remote/Modem  : Disconnected
     T - Telnet        : Connected (1)
     W - Web SSL       : Disconnected
     H - SSH           : Disconnected

Enter parameter(s) to change, A to disconnect All, or [Q] to Quit: q
q

   -> Current user access state has been retained.

[mp233] MP:CM> so

SO

This command allows you to modify the security options.
For User Configuration see the UC command.
For SNMP Configuration see the ID command.
For SSH enable/disable see the SA command.

Current Security Options:
     O - Login Options
     L - SSL Certificate
     - - SSH Key Pairs (MP Feature Not Licensed)

Enter menu item or [Q] to Quit: l
l

Current SSL Certificate parameters:
     SSL Certificate        : Generated
     Certificate Expiration : Sep  7 2007

Current SSL Certificate status:
     N - Common Name         : 0.0.0.0
     O - Organization        : organization
     U - Organizational Unit : unit
     C - Country             : country
     R - Region/State        : region
     L - Locality/City       : locality
     E - Email Address       : email

Enter parameter(s) to change, A to modify All, or [Q] to Quit: a
a

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     DEFAULT to set the default value, or
     Q to Quit

Current Common Name: 0.0.0.0

Enter new value, or Q to Quit: q
q

   -> Current Security Options have been retained.

Current Security Options:
     O - Login Options
     L - SSL Certificate
     - - SSH Key Pairs (MP Feature Not Licensed)

Enter menu item or [Q] to Quit: o
o

Current Security Options:
     L - Login Timeout in minutes          : 4
     N - Number of Password Faults allowed : 3
     F - Allow MP Firmware upgrade via PCI : Enabled
     R - Allow MP reset via IPMI           : Enabled
     P - Allow MP password reset via IPMI  : Enabled

Enter parameter(s) to change, A to modify All, or [Q] to Quit: l
l

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     DEFAULT to set the default value, or
     Q to Quit

Login Timeout in minutes:
   Current -> 4
              1 (default)
              Any number 1 to 5

Enter new value, or Q to Quit: 1
1

   -> Login Timeout in minutes will be updated

New Security Options (* modified values):
   * L - Login Timeout in minutes          : 1
     N - Number of Password Faults allowed : 3
     F - Allow MP Firmware upgrade via PCI : Enabled
     R - Allow MP reset via IPMI           : Enabled
     P - Allow MP password reset via IPMI  : Enabled

Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: q
q

   -> Current Security Options have been retained.

Current Security Options:
     O - Login Options
     L - SSL Certificate
     - - SSH Key Pairs (MP Feature Not Licensed)

Enter menu item or [Q] to Quit: o
o

Current Security Options:
     L - Login Timeout in minutes          : 4
     N - Number of Password Faults allowed : 3
     F - Allow MP Firmware upgrade via PCI : Enabled
     R - Allow MP reset via IPMI           : Enabled
     P - Allow MP password reset via IPMI  : Enabled

Enter parameter(s) to change, A to modify All, or [Q] to Quit: l
l

For each parameter, enter:
     New value, or
     <CR> to retain the current value, or
     DEFAULT to set the default value, or
     Q to Quit

Login Timeout in minutes:
   Current -> 4
              1 (default)
              Any number 1 to 5

Enter new value, or Q to Quit: 1
1

   -> Login Timeout in minutes will be updated

New Security Options (* modified values):
   * L - Login Timeout in minutes          : 1
     N - Number of Password Faults allowed : 3
     F - Allow MP Firmware upgrade via PCI : Enabled
     R - Allow MP reset via IPMI           : Enabled
     P - Allow MP password reset via IPMI  : Enabled

Enter Parameter(s) to revise, Y to confirm, or [Q] to Quit: y
y

   -> Security Options have been updated.

Current Security Options:
     O - Login Options
     L - SSL Certificate
     - - SSH Key Pairs (MP Feature Not Licensed)

Enter menu item or [Q] to Quit: o
o

Current Security Options:
     L - Login Timeout in minutes          : 1
     N - Number of Password Faults allowed : 3
     F - Allow MP Firmware upgrade via PCI : Enabled
     R - Allow MP reset via IPMI           : Enabled
     P - Allow MP password reset via IPMI  : Enabled

Enter parameter(s) to change, A to modify All, or [Q] to Quit: q
q

   -> Current Security Options have been retained.

Current Security Options:
     O - Login Options
     L - SSL Certificate
     - - SSH Key Pairs (MP Feature Not Licensed)

Enter menu item or [Q] to Quit: q
q

[mp233] MP:CM> tel

Unrecognized Command : Type HE for help on the available commands

[mp233] MP:CM> ps

PS
System Power state: on           
Temperature       : Normal       

Power supplies                 State                       
-----------------------------------------------------------
Power Supply 1                Normal                         

Fans                           State                       
-----------------------------------------------------------
Fan 1 (PSU)                   Normal                        
Fan 2 (Mem)                   Normal                        
Fan 3 (CPU)                   Normal                        

[mp233] MP:CM> pc

PC

Current System Power State: on

Power Control Menu:
     C   - Power Cycle
     on  - Power on
     OFF - Power Off
     G   - Graceful Shutdown

Enter menu item or [Q] to Quit: q
q

   -> Current System Power State has been retained

[mp233] MP:CM> ma

   MP MAIN MENU:

         CO: Console
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Log
         SL: Show Event Logs
         HE: Main Help Menu
          X: Exit Connection

[mp233] MP> co

 

        (Use Ctrl-B to return to MP main menu.)

 

- - - - - - - - - - Prior Console Output - - - - - - - - - -

root@rx233   [/root]
#

root@rx233   [/root]
# exit
logout root

HP-UX rx233 B.11.31 ia64 hp server rx1620
Console Login: root
- - - - - - - - - - - - Live Console - - - - - - - - - - - -

HP-UX rx233 B.11.31 ia64 hp server rx1620
Console Login: root
Password:
Last successful login:       Mon Jun 18 14:57:49 KST 2012 /dev/console 
Last authentication failure: Mon Jun 18 14:57:47 KST 2012 /dev/console 
Please wait...checking for disk quotas
(c)Copyright 1983-2006 Hewlett-Packard Development Company, L.P.
(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
(c)Copyright 1980, 1984, 1986 Novell, Inc.
(c)Copyright 1986-2000 Sun Microsystems, Inc.
(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
(c)Copyright 1989-1993  The Open Software Foundation, Inc.
(c)Copyright 1990 Motorola, Inc.
(c)Copyright 1990, 1991, 1992 Cornell University
(c)Copyright 1989-1991 The University of Maryland
(c)Copyright 1988 Carnegie Mellon University
(c)Copyright 1991-2006 Mentat Inc.
(c)Copyright 1996 Morning Star Technologies, Inc.
(c)Copyright 1996 Progressive Systems, Inc.

Confidential computer software. Valid license from HP required for
possession, use or copying.  Consistent with FAR 12.211 and 12.212,
Commercial Computer Software, Computer Software Documentation, and
Technical Data for Commercial Items are licensed to the U.S. Government
under vendor's standard commercial license.

You have mail.
                                                                                                                                               
Value of TERM has been set to "vt100".
WARNING:  YOU ARE SUPERUSER !!

root@rx233   [/root]
#

root@rx233   [/root]
# who
root       console      Jun 18 15:16
root       pts/ta       Jun 18 13:12

root@rx233   [/root]
# echo "shutdown to test pc in MP"
shutdown to test pc in MP

root@rx233   [/root]
# echo "before that modify passwd"
before that modify passwd

root@rx233   [/root]
# passwd
Changing password for root
New password:
Re-enter new password:
Passwd successfully changed

root@rx233   [/root]
#

root@rx233   [/root]
#

root@rx233   [/root]
# shutdown -hy 10

SHUTDOWN PROGRAM
06/18/12 15:18:39 KST

Broadcast Message from root (console) Mon Jun 18 15:18:39...
PLEASE LOG OFF NOW ! ! !
        System maintenance about to begin.
All processes will be terminated in 10 seconds.

Waiting a grace period of 10 seconds for users to logout.
Do not turn off the power or press reset during this time.

Broadcast Message from root (console) Mon Jun 18 15:18:49...
SYSTEM BEING BROUGHT DOWN NOW ! ! !

/sbin/auto_parms: DHCP access is disabled (see /etc/auto_parms.log)

    
     System shutdown in progress
     ___________________________

     Stop Highly Available cluster ................................... N/A
     Stopping Control Daemon ......................................... OK
     Stop CDE login server ........................................... OK
     Stop LVM daemon ................................................. OK
     Stop kwdbd ...................................................... N/A
     Stopping HP-UX Apache-based Web Server .......................... OK
     Stopping HP-UX Tomcat-based Servlet Engine. ..................... N/A
     Stopping HP-UX Webmin-based Admin ............................... OK
     Stopping the HPUX Webproxy subsystem ............................ OK
     Stopping HP-UX XML Web Server Tools ............................. OK
     Stop X print server(s) .......................................... N/A
     Stop NFS server subsystem ....................................... OK
     Collecting AVIO and VIO hba and lun inventory.. ................. OK
     Shutting down CIFS Client ....................................... N/A
     Stopping Event Monitoring Service ............................... OK
     Stop interrupt balance daemon ................................... N/A
     Shutting down the Winbind Daemon ................................ OK
     Unload/Uninstall XF86 DLKM Helper Modules ....................... OK
     Stopping the gWLM Agent ......................................... OK
     Stop Workload Manager subsystem ................................. OK
     Reset PRM and shut down PRM daemons ............................. OK
     Shutting down the System Management HomePage server ............. OK
     Shutting down Perf Agent software ............................... OK
     Stopping the perfd daemon. ...................................... OK
     Stopping USB hub daemon ......................................... OK
     Stopping audio server daemon .................................... OK
     Stop auditing subsystem ......................................... OK
     Stop environment monitoring daemon .............................. OK
     Stop diagnostic subsystem ....................................... OK
     Stop oserrlogd .................................................. OK
     Stop clock daemon ............................................... OK
     Stop print spooler .............................................. OK
     Stop accounting ................................................. N/A
     Stopping time synchronization ................................... N/A
     Stop vt daemon .................................................. OK
     Terminating X Font Server ....................................... OK
     Stop HA cluster WBEM subagent ................................... OK
     Stopping HP-UX Secure Shell ..................................... OK
     Stopping Instant Capacity ....................................... N/A
     Stop CIM cimserver subsystem .................................... OK
     Stop RPC daemon ................................................. OK
     Stop DCE daemons ................................................ OK
     Stop HA cluster SNMP subagent ................................... OK
     Stopping OSPF MIB Network Management subAgent ................... N/A
     Stopping SNMP HP-UNIX Network Management subAgent ............... OK
     Stopping SNMP IPv6 Network Management subAgent .................. OK
     Stopping SNMP MIB-2 Network Management subAgent ................. OK
     Stopping Native Adapter Agent ................................... OK
     Stopping SNMP Trap Dest Network Management subAgent ............. OK
     Stopping SNMP Master Network Management daemon .................. OK
     Stop HA cluster proxy daemon .................................... OK
     Stopping outbound connection daemons for DDFA software .......... N/A
     Stopping syslog-ng daemons ...................................... N/A
     Stopping cfengine's cfservd daemon .............................. N/A
     Shutting down sendmail [Done] Shutting down sm-client [Done] .... OK
     Stopping IPv6 router advertisement daemon ....................... N/A
     Stopping remote system status daemon ............................ N/A
     Stopping RARP protocol daemon ................................... N/A
     Stop PPPoE configuration ........................................ N/A
     Stop PPP configuration .......................................... OK
     Stopping router discover protocol daemon ........................ N/A
     Stopping ramd routing daemon .................................... N/A
     Stopping dynamic routing daemon ................................. N/A
     Stopping Internet services daemon ............................... OK
     Stopping multicast routing daemon ............................... N/A
     Stop AUTOFS subsystem ........................................... OK
     Stop NFS client subsystem ....................................... OK
     Stop lock manager subsystem ..................................... OK
     Stop NIS client subsystem ....................................... OK
     Stop ldap client daemon ......................................... OK
     Stop NIS/LDAP server subsystem .................................. N/A
     Stop NIS server subsystem ....................................... OK
     Stop NFS core subsystem ......................................... OK
     Stopping name server daemon ..................................... N/A
     Unconfiguring DHCPv6 Interfaces ................................. OK
     Stopping DHCPv6 Server daemon ................................... N/A
     Stopping sfmdb PostgreSQL daemons ............................... OK
     Unconfigure LAN interfaces ...................................... OK
     Unconfigure LAN interfaces for IPv6 ............................. OK
     Unconfigure HP igssn Gigabit Ethernet interfaces ................ OK
     Unconfigure HP gelan Gigabit Ethernet interfaces ................ OK
     Unconfigure HP iether 100BT/Gigabit Ethernet interfaces ......... OK
     Unconfigure HP igelan Gigabit Ethernet interfaces ............... OK
     Stop network tracing and logging daemon ......................... OK
     Stop pty allocator daemon ....................................... OK
     Stop system message logging daemon .............................. OK
     Stop Software Distributor agent daemon .......................... OK
     Stop Essential Services monitoring daemon ....................... OK
     Stopping Event Management (EVM) ................................. OK
     Unconfigure Loopback interfaces (lo0) ........................... OK
     Stop Utmp Daemon ................................................ OK
     Stopping livedump subsystem ..................................... OK
     Stop syncer daemon .............................................. OK
     Killing user processes .......................................... OK
     Starting the fsdaemon for transition into single-user mode ...... OK
     Apply kernel configuration changes for next boot ................ N/A
     Unmount file systems ............................................ OK

Transition to run-level 0 is complete.
Executing "/sbin/reboot -h         ".
Shutdown at 15:19 (in 0 minutes)

        *** FINAL System shutdown message from root@rx233 ***

System going down IMMEDIATELY
Note: reboot: Couldn't write to : /dev/pts/ta

System shutdown time has arrived
Calling function e000000001866260 for Shutdown State 1 type 0x1

sync'ing disks (0 buffers to flush):
 0 fcache pages still dirty
 0 buffers not flushed
 0 buffers still dirty
Calling function e000000001aea350 for Shutdown State 5 type 0x1

Closing open logical volumes...
Done